LTA Actuator Compatibility with Manual Positioners

LTA series linear actuators are offered in HS or HL version for 50 or 25 mm travel range with 50 or 120 N load capacity respectively.

Compatibility Key

  Fully compatible1
  Compatible but may require standard interface adaptor and/or include small performance limitation
  Call your local sales office or contact us online (877-835-9620 in the U.S.).2
  Not compatible or recommended3

Manual Linear Stages

LTA-HS LTA-HL Notes
461-X-M
461 Series		 LTA-HS: LTA travel range must be limited to 13mm
The vertical load capacity is limited to 30N
462-X-M
462 Series		 LTA-HS: SD, M type: Compatible
LH type: requires custom interface adapter
ULTRAlign Precision Fiber Optic Alignment Stages
561 Series		 LTA-HS: LTA travel range must be limited to 13 mm (vertical to 6 mm)
562-XYZ-98
562 & 562F Series		 LTA-HS: For X and Y-axis, LTA travel range must be limited to 13mm.
LTA-HS must be fixed at 4.6mm from XY stage.
Call for information on Z-axis.
M-UMR8.51
UMR8.51		 LTA-HS: Use ADAPT-BM17-375
M-UMR8.25
UMR8.25

LTA-HS: Use ADAPT-BM17-375
LTA travel range must be limited to 25mm
UMR8.25 needs to be raised to avoid LTA-HL/LTA-HS interference with mounting surface
UMR12.40
UMR12.40
UMR12.63
UMR12.63
423
423		 LTA-HS: LTA travel range must be limited to 25mm
433
433
443
443		 LTA-HS: travel range of 443 is limited to 46mm.
426
426		 LTA-HS: LTA travel range must be limited to 25mm.
436
436		 LTA-HS: Mount LTA with a special washer with thickness of 1.6mm, in order to center the stage travel range
460P-X-05
460P-05		 LTA-HS: LTA travel must be limited to 13mm.
460P-X
460P		 LTA-HS: LTA travel must be limited to 25mm.
MVN80
MVN80

Manual Tilt Platforms

LTA-HS LTA-HL Notes
TGN80
TGN80		 LTA-HL: Stage travel range is limited to 8mm

Manual Lens Positioners

LTA-HS LTA-HL Notes
U400-AC2K
U400-AC2K		 LTA-HL: LTA travel range must be limited to 13.2mm.
OM-sl8abm-S
SL8A		 LTA-HL: LTA travel range must be limited to 9mm
OM-sl8abm-S
SL15A		 LTA-HL: LTA travel range must be limited to 9 mm
Angular range of ±2° possible
OM-sl8abm-S
SL20A		 LTA-HL: LTA travel range must be limited to 9 mm
Angular range of ±2° possible
SL101.6BD
SL101.6N		 LTA-HL: LTA travel must be limited to 8mm

Notes

  1. In some cases, one must limit the travel range of actuators and these are specified in the note.
  2. "Yellow" may require custom interface adapter or may include significant performance limitations in terms of travel length, load capacity and etc.
  3. For TRA or TRB series actuator, only one TRA or TRB model is chosen as "Green" in most cases due to the travel length requirement. (eg. TRA6 or TRA25 can still be compatible with 460A-X but not recommended as TRA12 is an ideal choice with its 12mm travel range).