PZA12 Compatibility with Manual Positioners

	Fully compatible¹
	Compatible but may require standard interface adaptor and/or include small performance limitation
	Call your local sales office or contact us online (877-835-9620 in the U.S.).²
	Not compatible or recommended³

	Compatibility	Notes
461 Series		The vertical load capacity is limited to 30N.
462 Series		Travel ranges are limited to 12.5mm. The vertical load capacity is limited to 30N.
561 Series		X and Y-axis travel ranges are limited to 12.5mm. X and Y-axis working travel ranges are from -6.25 to +6.25mm.
562 Series		For X and Y-axis, stage travel is limited to 12.5mm. For X and Y-axis, working travel ranges are from -6.25 to +6.25. For X and Y-axis, PZA12 should be fixed at 2.3mm from stage. Call for info on Z-axis.
460P-05		Stage travel is limited to 12.5mm.
460A-X
460A-XY
460A-XZ
460A-XYZ
401
406

	Compatibility	Notes
RS65
481-A
TGN120		Use ADAPT-BM25-375 Elevation travel range is limited to ±2.38°

	Compatibility	Notes
U100-A
U200-A
U300-A
U100-AC2K
U200-AC2K
U300-AC2K
U400-AC2K		Mount travel range is limited to +/-3.3°
U100-ACG
U100-G
U200-G
SL8A		Use ADAPT-BM17-375
SL15A		Use ADAPT-BM17-375 Angular range of ±2° possible
SL20A		Use ADAPT-BM17-375 Angular range of ±2° possible
SB18YZ		Use ADAPT-BM17-375
BSD-2A		Beam height needs to be extended in order to avoid interference with ground. TRA12 must be fixed at 1.1mm from gimbal mount

In some cases, one must limit the travel range of actuators and these are specified in the note.
"Yellow" may require custom interface adapter or may include significant performance limitations in terms of travel length, load capacity and etc.
For TRA or TRB series actuator, only one TRA or TRB model is chosen as "Green" in most cases due to the travel length requirement. (eg. TRA6 or TRA25 can still be compatible with 460A-X but not recommended, as TRA12 is an ideal choice with its 12mm travel range)

PZA12 Actuator Compatibility with Manual Positioners