TRA and TRB Actuator Compatibility with Manual Positioners

TRA & TRB series miniature motorized linear actuators are offered in 6 mm, 12 mm and 25 mm travel versions with 60 N or 90 N load capacity.

Compatibility Key

  Fully compatible1
  Compatible but may require standard interface adaptor and/or include small performance limitation
  Call your local sales office or contact us online (877-835-9620 in the U.S.).2
  Not compatible or recommended3

TRA & TRB Series Motorized Actuator Compatibility

TRA6
TRB6		 TRA12 TRB12 TRA25 TRB25 Notes
461-X-M
461 Series		 TRA12:
Travel range is limited to 11.5mm.
Working travel range is from -6.5mm to +5mm
ULTRAlign Precision Fiber Optic Alignment Stages
561 Series		 TRA12:
Travel range is limited to 11.75mm
Working travel range is from - 6.5mm to +5.25mm
562-XYZ-98
562 & 562F Series		 TRA12:
Vertical load capacity is limited to 30N
M-UMR8.25
UMR8.25		 TRA12:
Use ADAPT-TRA
Travel Range is limited to 12mm and decentered
TRA25:
Use ADAPT-TRA25
423
423		 TRA25:
Travel range is limited to 19.8mm, contact us for special adapter required
426
426
460P-X-05
460P-05
460P-X
460P
460A-X
460A-X
460A-XY
460A-XY
460A-XZ
460A-XZ
460A-XYZ
460A-XYZ
401
401 and 406		 TRA12:
Stage travel range is limited to 11mm
MVN80
MVN80		 TRA25:
Use ADAPT-TRA25
Vertical load capacity is limited to 60N

TRA & TRB Series Motorized Actuator Compatibility

TRA6
TRB6		 TRA12
TRB12		 TRA25
TRB25		 Notes
MC-rs_40_65-S-L
RS65
481-A
481-A
GON40-U
GON40-U		 TRA6:
Stage travel range is limited to ±4.5°
GON40-L
GON40-L		 TRA6:
Stage travel range is limited to ±2.5°
GON65-U
GON65-U
GON65-L
GON65-L		 TRA25:
Stage travel range is limited to -5°/+4°
17-048-S
561-GON
TGN80
TGN80		 TRA12:
Use ADAPT-TRA
TGN120
TGN120		 TRA25:
Use ADAPT-BM25-375

TRA & TRB Series Motorized Actuator Compatibility

TRA6
TRB6		 TRA12
TRB12		 TRA25
TRB25		 Notes
SN100C-F
SN100		 TRA6:
Mount travel range is limited to ±4°
U100-A-159
U100-A		 TRA6:
Mount angular range is limited to ±4°
U200-A
U200-A		 TRA6:
Mount travel range is limited to ±3°
U300-A
U300-A
U100-AC2K
U100-AC2K		 TRA6:
Mount travel range is limited to ±3°
U200-AC2K
U200-AC2K		 TRA6:
Mount travel range is limited to ±2.8°
U300-AC2K
U300-AC2K
U100-ACG
U100-ACG		 TRA6:
Mount travel range is limited to ±4.4°
U100-G
U100-G		 TRA6:
Mount travel range is limited to ±4.7°
U200-G
U200-G		 TRA6:
Mount travel range is limited to ±2.7°
VGM-1
VGM-1N
VGM-2
VGM-2N
600A-2R
600A-2R		 TRA12:
Mount travel range is limited to ±3.9°
TRA25:
Requires a ring with thickness of 2.5mm between TRA and 600A-4X
600A-4R
600A-4R		 TRA12:
Mount angular range is limited to ±3.9°
TRA25:
Requires a ring with thickness of 2.5mm between TRA and 600A-4X
625-RC6
625-RC6		 TRA12:
Mount angular range is limited to -5° / +4,5°
605-2
605-2		 TRA12:
Call for info
605-4
605-4		 TRA6:
Mount travel range is limited to ±3.4°
OM-sl8abm-S
SL8A		 TRA6:
Use ADAPT-TRA6
OM-sl8abm-S
SL15A		 TRA6:
Use ADAPT-TRA
Angular range of ±1.7° possible
TRA12:
Use ADAPT-TRA
Angular range of ±2° possible
OM-sl8abm-S
SL20A		 TRA6:
Use ADAPT-TRA6
Angular range of ±1.3° possible
TRA12:
Use ADAPT-TRA
Angular range of ±2° possible
SL25.4BD
SL25.4N		 TRA6:
Use ADAPT-TRA
TRA12:
Use ADAPT-TRA
SL50BD
SL50N		 TRA6:
Use ADAPT-TRA
TRA12:
Use ADAPT-TRA
SL51BD
SL51N		 TRA6:
Use ADAPT-TRA
TRA12:
Use ADAPT-TRA
SL76.2BD
SL76.2N		 TRA6:
Use ADAPT-TRA
TRA12:
Use ADAPT-TRA
SL101.6BD
SL101.6N		 TRA6:
Use ADAPT-TRA
TRA12:
Use ADAPT-TRA
OM-sb18yzbm-S
SB18YZ		 TRA6:
Use ADAPT-TRA
TRA12:
Use ADAPT-TRA
BSD-2A
BSD-2A		 TRA12:
Beam height needs to be extended to avoid interference with ground.
TRA12 must be fixed at 1.1mm from gimbal mount.
ULM-TILT
ULM-TILT		 TRA6:
Tilt travel range is limited to ±2.5°
A ring with 3.2mm thickness is needed for vertical actuator
TRA12:
Call for info

Notes

  1. In some cases, one must limit the travel range of actuators and these are specified in the note.
  2. "Yellow" may require custom interface adapter or may include significant performance limitations in terms of travel length, load capacity and etc.
  3. For TRA or TRB series actuator, only one TRA or TRB model is chosen as "Green" in most cases due to the travel length requirement. (eg. TRA6 or TRA25 can still be compatible with 460A-X but not recommended as TRA12 is an ideal choice with its 12mm travel range)