Aluminum Mirror Pack, Economy, Borofloat, 12.7 mm, λ/10, 450-700 nm, Qty 10
This is a 10-pack of the 05D620ER.1 Economy Boradband Aluminum Mirrors. By taking advantage of advanced polishing techniques and our high-volume manufacturing, these mirrors are truly cost effective. These 12.7 mm (1/2 inch) diameter mirrors are made from a 3.1 mm thick Borofloat® 33 substrate and are coated with the ER.1 aluminum coating. Borofloat® 33 has low thermal expansion and is an excellent substrate for most applications. The ER.1 enhanced aluminum coating may be used wherever a broadband visible and near infrared reflector is needed. A multilayer dielectric stack deposited over the aluminum film boosts reflectance and improves the durability of the coating. The 05D620ER.1 has an average reflectivity greater than 93% from 450–700 nm. These mirrors have a λ/10 surface flatness and a 40-20 surface quality. Specifications
Wavelength Region
VIS
Wavelength Range
450-700 nm
Mirror Shape
Round
Diameter
12.7 mm
Mirror Size
Ø12.7 mm
Thickness
3.1 mm
Material
Borofloat® 33
Coating Type
Enhanced Aluminum
Coating Code
ER.1
Surface Quality
40-20 scratch-dig
Surface Flatness
λ/10 at 632.8 nm
Angle of Incidence
0-45°
Clear Aperture
≥central 80% of diameter
Back Surface
Ground
Reflectivity
Ravg>93%, Rmin>90 % @ 450-700 nm
Damage Threshold
0.5 J/cm², 10 ns pulses , 20 Hz at 532 nm
Diameter Tolerance
+0/-0.13 mm
Thickness Tolerance
±0.25 mm
Chamfers
0.25–0.76 mm face width
Chamfers Angle Tolerance
45° ±15°
Cleaning
Wavelength Region
VIS
Wavelength Range
450-700 nm
Mirror Shape
Round
Diameter
12.7 mm
Mirror Size
Ø12.7 mm
Thickness
3.1 mm
Material
Borofloat® 33
Coating Type
Enhanced Aluminum
Coating Code
ER.1
Surface Quality
40-20 scratch-dig
Surface Flatness
λ/10 at 632.8 nm
Angle of Incidence
0-45°
Clear Aperture
≥central 80% of diameter
Back Surface
Ground
Reflectivity
Ravg>93%, Rmin>90 % @ 450-700 nm
Damage Threshold
0.5 J/cm², 10 ns pulses , 20 Hz at 532 nm
Diameter Tolerance
+0/-0.13 mm
Thickness Tolerance
±0.25 mm
Chamfers
0.25–0.76 mm face width
Chamfers Angle Tolerance
45° ±15°
Cleaning