Laser Diode Module, 1310 nm, 5 mW, CW, Elliptical Beam
The LQC1310-05E CW Laser Diode Module is an economical choice. It includes the diode and collimating optics in a single case. This Fabry-Perot (FP) 1310 nm Laser Diode Module with a 5 mW CW elliptical beam comes in a self contained module. It requires a 5 VDC external power supply. An LPMS-5-110 or LPMS-5-220 Series Power Supply (not included) must be used with this LD module to meet CDRH requirements by providing an interlock input, key enable switch, delayed start-up, and laser active indicator. Warranty is not applicable when a custom power supply is used to drive the module. Specifications
Type
CW Laser Diode
Center Wavelength
1310 nm
Center Wavelength Tolerance
±20 nm
Output Power
5 mW
Power Stability
<1% (8 hr.)
Beam Diameter (1/e<sup>2</sup>)
3.41 x 4.09 mm
Beam Divergence Full Angle
<1.5 x 0.7 mrad
Size
Ø38.1 x 157.5 mm
Noise
<0.5%
Applications
Spectroscopy, Interferometry, Machine Vision, Marking, Flow Cytometry, Tissue Fluorescence
Linewidth
1 nm
Power Requirements
4.8 to 12 VDC
Operating Temperature
0 to 40°C
Type
CW Laser Diode
Center Wavelength
1310 nm
Center Wavelength Tolerance
±20 nm
Output Power
5 mW
Power Stability
<1% (8 hr.)
Beam Diameter (1/e<sup>2</sup>)
3.41 x 4.09 mm
Beam Divergence Full Angle
<1.5 x 0.7 mrad
Size
Ø38.1 x 157.5 mm
Noise
<0.5%
Applications
Spectroscopy, Interferometry, Machine Vision, Marking, Flow Cytometry, Tissue Fluorescence
Linewidth
1 nm
Power Requirements
4.8 to 12 VDC
Operating Temperature
0 to 40°C