Laser Diode Module, 940 nm, 90 mW, CW, Elliptical beam
The LQC940-90E CW Laser Diode Module is an economical choice. It includes the diode and collimating optics in a single case. This Fabry-Perot (FP) 940 nm Laser Diode Module with a 90 mW CW elliptical beam comes in a self contained module. It requires a 5 VDC external power supply. An LPMS-5-110 or LPMS-5-220 Series Power Supply (not included) must be used with this LD module to meet CDRH requirements by providing an interlock input, key enable switch, delayed start-up, and laser active indicator. Warranty is not applicable when a custom power supply is used to drive the module. Specifications
Type
CW Laser Diode
Center Wavelength
940 nm
Center Wavelength Tolerance
±15 nm
Output Power
90 mW
Power Stability
<1% (8 hr.)
Beam Diameter (1/e<sup>2</sup>)
1.08 x 3.78 mm
Beam Divergence Full Angle
<1.5 x 0.7 mrad
Size
Ø38.1 x 157.5 mm
Noise
<0.5%
Applications
Spectroscopy, Interferometry, Machine Vision, Marking, Flow Cytometry, Tissue Fluorescence
Linewidth
0.5 nm
Power Requirements
4.8 to 12 VDC
Operating Temperature
0 to 40°C
Type
CW Laser Diode
Center Wavelength
940 nm
Center Wavelength Tolerance
±15 nm
Output Power
90 mW
Power Stability
<1% (8 hr.)
Beam Diameter (1/e<sup>2</sup>)
1.08 x 3.78 mm
Beam Divergence Full Angle
<1.5 x 0.7 mrad
Size
Ø38.1 x 157.5 mm
Noise
<0.5%
Applications
Spectroscopy, Interferometry, Machine Vision, Marking, Flow Cytometry, Tissue Fluorescence
Linewidth
0.5 nm
Power Requirements
4.8 to 12 VDC
Operating Temperature
0 to 40°C