XYZ Linear Stage, ULTRAlign, 1.0 in., Crossed-Roller, Side Drive

25 mm Travel ULTRAlign Crossed-Roller Bearing Stages

The 462-XYZ-SD ULTRAlign™ Precision Integrated Crossed-Roller Bearing Linear Stages feature stainless steel construction for high stability, with thermally matched, hardened steel crossed-roller bearings for unsurpassed performance and a side drive for a small footprint. The crossed-roller bearings and precision-manufactured bearing reference surfaces provide exceptionally linear 1.0 inch XYZ travel, with angular deviation better than 100 μrad about any axis. Our analysis has shown that optimum stability demands that not only the stage be built of stainless steel, but also the angle brackets, actuator mounts, and even the assembly hardware.

ULTRAlign stages overcome the limitations of multi-axis stages derived from traditional tooling industry designs. The actuators are located out-of-the-way of oversized loads. Generous 1/4-20 hole patterns provide easy mounting. The mounting base can be removed for a lower profile. Each axis features a non-influencing locking mechanism for negligible motion of the stage when locking or unlocking. Specially designed actuator mounting blocks allow quick and easy actuator changes, on any axis, at any time. Actuators are not included.

Precision Control and Extra Stiffness

ULTRAlign Stainless Steel Crossed-Roller Translation Stages provide a low profile, yet solid and stable linear translation, that can be locked in place without disturbing translation or position. Perfect for many standard optical applications such as interferometry, linear translation by the crossed-roller bearings and the precision-manufactured bearing reference surfaces provide a maximum angular deviation of <100 µrad for any axis. Z-axis stages do not depend on springs for support, ensuring maximum vertical load capacity. The mounting surface of these stages has multiple threaded holes, available in either English or Metric units, to make mounting easy and versatile in most table-top optical systems.

Preloaded crossed-roller bearings provide repeatable, zero stick-slip linear motion with negligible side-play.

Side-Drive Versions for Smaller Footprint

When a smaller footprint is required, mounting actuators on the side of a stage can minimize the envelope of the positioning system. Side-drive versions of the 462 Series stages are available as 1-, 2-, and 3-axis assemblies, with right- and left-handed configurations for the 3-axis system. To convert an existing center-drive stage to side-drive, Newport offers side-drive mounting kit. See table below for the compatible kit for each axis of a right- or left-handed stage. The locking plates may be required to relocate to the other side of the stage.

Kit	->	->
	X, Y	Z
	Z	X, Y

Individually Tested to Guarantee <100 µrad Deviation

Each ULTRAlign Stainless Steel Crossed-Roller Translation Stage is tested individually to ensure it meets the <100 µrad angular deviation requirement. We don't just say it, we guarantee it. The actual test results are included with each stage.

Specifications

Technical Specs

Axes of Travel
X, Y, Z
Orientation
Right-Handed
Maximum Stage Travel
25 mm
Centered Normal Load Capacity
191 N
Vertical Axial Load Capacity
67 N
Angular Deviation
<100 µrad
Material
Stainless Steel
Bearings
Crossed-Roller Bearings
Drive Location
Side Drive

Thread Type
1/4-20
Recommended Adjustment Screw
AJS100-1
Recommended Vernier Micrometer
SM-25
Recommended Digital Micrometer
DMH-1
Recommended Lockable Micrometer
DM-25L
Recommended LTA Motorized Actuator
LTA-HS

Axes of Travel
X, Y, Z
Orientation
Right-Handed
Maximum Stage Travel
25 mm
Centered Normal Load Capacity
191 N
Vertical Axial Load Capacity
67 N
Angular Deviation
<100 µrad
Material
Stainless Steel
Bearings
Crossed-Roller Bearings
Drive Location
Side Drive

Thread Type
1/4-20
Recommended Adjustment Screw
AJS100-1
Recommended Vernier Micrometer
SM-25
Recommended Digital Micrometer
DMH-1
Recommended Lockable Micrometer
DM-25L
Recommended LTA Motorized Actuator
LTA-HS

Resources & Downloads

Other

462-XYZ-SD_RoHS2021.pdf(685.2 kB, PDF)

Related Products

Similar

Description	Compatibility	Price
562-XYZXYZ Linear Stage, ULTRAlign, 0.5 in., Right-Handed, 8-32 and 1/4-20	IMPERIAL	$2,988
SDS65Manual Linear Stage, 0.98 in. Travel, Ball Bearings, 1/4-20 Threads	IMPERIAL	$803
460P-XYZXYZ Linear Stage, Peg-Joining, 1.0 in. Travel, 8-32 and 1/4-20 Threads	IMPERIAL	$1,304
462-XYZ-MXYZ Linear Stage, ULTRAlign, 25 mm, Crossed-Roller, 8-32 & 1/4-20	IMPERIAL	$2,530
461-XYZ-MXYZ Linear Stage, ULTRAlign, 13 mm, Crossed-Roller, 8-32 & 1/4-20	IMPERIAL	$2,078

Compatible

Description	Compatibility	Price
SDK-1Mounting Kit, Side-Drive, X or Y Axis, 462 Series	UNIVERSAL	$110
DM-25LLockable Differential Micrometer, 25 mm Coarse, 0.2 mm Fine,11 lb. Load	UNIVERSAL	$764
AJS100-1Adjustment Screw, 100 TPI, 25.4 mm Travel, Small Knob, Side Lock	UNIVERSAL	$39
LTA-HSMotorized Actuator, High Speed, 50 mm Travel, 3/8-40 Thread	UNIVERSAL	$2,463
SDK-2Mounting Kit, Side-Drive, Z Axis, 462 Series	UNIVERSAL	$110
SM-25Vernier Micrometer, 25 mm Travel, 23 lb. Load Capacity, 50.8 TPI	UNIVERSAL	$163

Frequently Purchased Together

Description	Compatibility	Price
SM-25Vernier Micrometer, 25 mm Travel, 23 lb. Load Capacity, 50.8 TPI	UNIVERSAL	$163
462-XYZ-LH-SDXYZ Linear Stage, ULTRAlign, 1.0 in., Crossed-Roller, Side Drive, Left-handed	IMPERIAL	$2,530
M-GON65-UGoniometric Stage, Upper, ±10°, 65 x 65 x 30 mm, M3 & M6	METRIC	$854
M-SDS65-BK90 Degree Angle Bracket, M-SDS65, M6 Thread	METRIC	$203
M-GON65-LGoniometric Stage, Lower, ±5°, 65 x 65 x 30 mm, M3 & M6	METRIC	$854
DMH-1Digital Micrometer, 25.4 mm Travel, ±2 µm Accuracy	UNIVERSAL	$511
SM-13Vernier Micrometer, 13 mm Travel, 9 lb. Load Capacity, 50.8 TPI	UNIVERSAL	$103
M-SA2-18X24Optical Breadboard Plate, Solid Aluminum, 450 x 600 mm, 25 mm M6 Grid	METRIC	$504