Motorized Rotation Stage, 350 mm, High-Speed DC Drive, Direct Encoder
The RV350HAT High Speed Rotation Stage provides high-precision angular positioning accuracy combined with high load capacity. This 350 mm diameter stage features a high speed DC drive enabling speeds up to 80°/s. This stage is equipped with a direct reading optical encoder attached to the moving platen for superior resolution and accuracy. All RV stages are constructed of tool steel, with rotation accuracy ensured by ground bearing surfaces. A double row of preloaded bearings allows for high off-center loads in a reduced footprint. The single monolithic design offers improved stiffness without compromising dynamic performance. Precise rotation is ensured by a precision ground and hardened worm gear.Steel Construction
The tool steel construction ensures enhanced rotation accuracy due to the ground bearing surfaces. The single monolithic design offers improved stiffness and thermal stability without compromising dynamic performance.
Highest Load Capacity
The double row of preloaded ball bearings allows for higher off center loads for its small footprint. The largest member of the RV DC motor product family can bear up to 650 kg or rotate up to 80 °/s while maintaining eccentricity of less than 4 µm.
High Speed and High Torque DC Motor Versions
High speed (CC and HAT) and high torque (CCHL, HAHL and HAHLT) versions of the RV DC motor stages are available. The high speed versions enable speeds up to 80°/sec. The high torque versions are equipped with a reduction gear which provides higher torque and payload inertia capacity. A rotary encoder is mounted on the worm gear shaft of the CC and CCHL versions. When superior repeatability, position stability and speed regulation is needed, the high speed HAT and high torque HAHLT versions feature a high-resolution direct reading encoder and tachometer. (RV120HAHL includes direct reading encoder, but no tachometer.)
Metrology Report Included at No Additional Cost
Newport guarantees specification values which are measured and recorded following ASME B5.57 and ISO 230-2 standards. The typical performance values are two times better than the guaranteed specifications.
Error Mapping Services
For critical positioning applications, Newport offers error mapping upon request for RV-HAT and RV-HAHLT stages driven by our XPS advanced motion controller. We will measure, implement, and verify the results of this error map that will individually optimize each stage's position accuracy. In addition, multi-axis error mapping is also available. Measurements are made at 20.0 ±0.2 °C. A certificate of calibration will be provided with your stage. Actual data may also be provided upon request.
Specifications
Angular Range
±170°
Maximum Speed
80°/s
Minimum Incremental Motion
0.75 mdeg
Maximum Torque
7 N·m
Centered Load Capacity
6500 N
Uni-directional Repeatability, Typical
±0.07 mdeg
Uni-directional Repeatability, Guaranteed
±0.10 mdeg
Bi-directional Repeatability, Typical
±0.4 mdeg
Bi-directional Repeatability, Guaranteed
±0.6 mdeg
Accuracy, Typical
±2.0 mdeg
Accuracy, Guaranteed
±2.5 mdeg
Wobble, Typical
±4.0 µrad
Wobble, Guaranteed
±8.0 µrad
Eccentricity, Typical
±1.4 µm
Inertia
1.2 kg.m2
Transversal Compliance
0.1 µrad/N·m
Origin
Optical, centered
Origin Repeatability
±0.1 mdeg
Encoder Resolution
0.035 mdeg
MTBF
20,000 h (25% load, 10% duty cycle)
Cable Length
3 m
Diameter
350 mm
Aperture Diameter
280 mm
Connector Type
DB25 Male
Thread Type
M6
Maximum Power Consumption
170 W
Weight
33 kg
Compliance
RoHS 3, CE
Angular Range
±170°
Maximum Speed
80°/s
Minimum Incremental Motion
0.75 mdeg
Maximum Torque
7 N·m
Centered Load Capacity
6500 N
Uni-directional Repeatability, Typical
±0.07 mdeg
Uni-directional Repeatability, Guaranteed
±0.10 mdeg
Bi-directional Repeatability, Typical
±0.4 mdeg
Bi-directional Repeatability, Guaranteed
±0.6 mdeg
Accuracy, Typical
±2.0 mdeg
Accuracy, Guaranteed
±2.5 mdeg
Wobble, Typical
±4.0 µrad
Wobble, Guaranteed
±8.0 µrad
Eccentricity, Typical
±1.4 µm
Inertia
1.2 kg.m2
Transversal Compliance
0.1 µrad/N·m
Origin
Optical, centered
Origin Repeatability
±0.1 mdeg
Encoder Resolution
0.035 mdeg
MTBF
20,000 h (25% load, 10% duty cycle)
Cable Length
3 m
Diameter
350 mm
Aperture Diameter
280 mm
Connector Type
DB25 Male
Thread Type
M6
Maximum Power Consumption
170 W
Weight
33 kg
Compliance
RoHS 3, CE
