High Speed Photodetector, 1000-1650 nm Battery Biased InGaAs Detector, 15 GHz

The 818-BB-35 High Speed InGaAs Detector consists of a free-space 830 to 1650 nm Battery Biased InGaAs photodetector with a 0.032 mm active diameter and a <25 ps rise time. It includes a built-in bias supply consisting of two standard 3 V lithium cells (6V total bias) and a 50 ohm BNC connector output. The photodetectors have an internal 50 Ω termination. As the responsivity data is applicable to the diode only, the detector output should be determined based on 1/2 the responsivity of that shown on graph. It is a low-cost solution for ultra-fast measurements up to a 15 GHz bandwidth. These detectors are suitable for applications where detector rise time of <25 psec are required for Q-switched and Ultrafast Laser output analysis. The batteries are easily replaceable and by disconnecting the detector from the oscilloscope input, when not in use, you can extend the lifetime of the batteries. It is equivalent to Coherent's Model ET-3500 (P/N 120-10058-0001).
InGaAs Free Space Detectors
The 818-BB-30, -31, and -35 consist of free-space, small and large area InGaAs detectors, with rise times ranging from 300 ps to 1.5 ns for covering the 1000-1600 nm wavelength range. Each unit includes a built-in bias supply consisting of standard 3 V lithium cells and a 50 ohm BNC connector output. The 818-BB-51 features an extended InGaAs photodetector with a wavelength range of 1475–2100 nm.
Rise Times as Fast as 25 ps
Resources & Downloads
3D Product Models
2D Product Drawings
818-BB Battery Installation(1.2 MB, PDF) 818-BB Non-Amplified High Speed Photodetectors User Manual(722 kB, PDF) Non-amplified Photodetectors User's Manual(788.3 kB, PDF) MKS EU RoHS2 - 818-BB Detectors(287.8 kB, PDF) Optical Receiver Finder







