Beam Splitting Top Adjust Mirror Mounts
Beam Splitting Top Adjust Mirror Mounts
Beam Splitting Top Adjust Mounts are ideal for use in compact spaces. The back side of these mounts has been scalloped out to allow a larger clear aperture for transmitted beams. They give you easy access to both tip and tilt adjustments from the top without worrying about blocking the beam. Top- and side-mounting schemes are compatible with post and pedestal mounting systems.
- Scalloped aperture for beam splitting applications
- Keying pin holes
- Compact mount design See All Features
| Compare | Description | Drawings, CAD & Specs | Avail. | Price | ||
|---|---|---|---|---|---|---|
 | 9774 Beam Splitting Top Adjust Mounts Mirror Mount, Top Adjust, 1.0 in. Diameter, 2 Knob Adjustment | |||||
 | 9774-K Beam Splitting Top Adjust Mounts Mirror Mount, Top Adjust, 1.0 in. Diameter, 2 Allen-key Adjustment | |||||
 | 9775 Beam Splitting Top Adjust Mounts Mirror Mount, Pint-Sized, 0.5 in. Diameter, 2 Knob Top Adjust | |||||
 | 9775-K Beam Splitting Top Adjust Mounts Mirror Mount, Pint-Sized, 0.5 in. Diameter, 2 Allen-Key Top Adjust |
Features
Scalloped aperture for Beam Splitting Applications
The back side of these mounts has been scalloped out to allow a larger clear aperture for beam splitting applications.
Keep Your Hands Out of Harm's Way
Top adjust mounts have their adjustment screws located above where the optic is held so that your hands never have to cross into the beam path area.
Alignment Pin Holes
These mounts feature alignment pin holes (shown in red) on the bottom (base) of the mount to enable keying of the position and orientation by means of dowel pins when directly mounting. (Note: Dowel pins not included with mount.) This is especially helpful in OEM applications.
Locking Adjusters
Hex-driven locking screws are available to lock the position of the optic in place for long term stability and to prevent unintended adjustments.
Side Mounting
All Beam Splitting Top Adjust Mounts can be mounted sideways via an 8-32 (M4) clearance hole (9774) or an 8-32 threaded hole (9775) to allow them to fit into areas with height restrictions. This is also useful if the actuators need to be accessed from the side rather than the top.
