Piezo Linear Stage, 27 mm travel
Model: AG-LS25-27
Product Series Overview
Agilis™ Piezo Motor Linear StagesThe Agilis™ AG-LS25-27 is a high precision, miniature, piezo motor driven linear stage. The piezo motor is directly coupled to the moving carriage, with no intermediate mechanisms, but held in for true set and forget long term stability. The AG-LS25-27 features 27 mm travel, 100nm MIM and with the supplied M2 screws and washers, is compatible with the SDS25 and DS25 manual linear stages. Precision motion is achieved by calibrated, pre-stressed linear ball bearings. The thermally matched stainless steel design and precision manufactured bearing surfaces provide ripple-free, low friction linear travel and angular deviations better than 200 μrad in any axis. Use with either the Agilis AG-UC2 handheld, AG-UC8 or AG-UC8PC controllers.
Multi-Axis Stage Configurations
Agilis™ piezo motor linear stages can be configured as XY, XZ, or XYZ stage stacks. You can use the 339233, 90 degree angle bracket for building XZ and XYZ stage configurations. Attention this bracket is not compatible with the AG-LS25-27 (as Z-axis). For XY stage assemblies of AG-LS25 stages, use the 4 x TC M3x4 screws supplied with each stage. The AG-LS25-27 & AG-LS25-27V6 must be positioned at the bottom of the stack (X-axis). The AG-LS25 & AG-LS25V6 stages can be stacked on top of the AG-LS25-27(V6) as the Y-axis, or as the Z-axis using the 339233, 90 degree angle bracket. Please note that the 339233, 90 degree angle bracket, is anodized and not vacuum compatible. An XZ stage stack is shown.
50 nm Minimum Incremental Motion
Set-and-Forget Long-Term Stability
Ripple-Free and Low Friction Travel
Resources & Downloads
3D Product Models
2D Product Drawings
AG-LS25-27-S(232.3 kB, PDF) Agilis™ Series Piezo Motor Driven Positioners(1.7 MB, PDF) Agilis Piezo Motor Driven Components User Manual(2.6 MB, PDF)